Fractal Design Core 1100 Mini Tower Black

The shape or design of the product.

Characteristics of the device.

The colour e.g. red, blue, green, black, white.

Design of the supported motherboards.

A drive bay is a standard-area for adding hardware to a computer. Most drive bays are fixed to the inside of a case, but some can be removed. A 3.5" drive bay is for floppy disks.

A drive bay is a standard-area for adding hardware to a computer. Most drive bays are fixed to the inside of a case, but some can be removed. A 5.25" drive bay, also known as full-height bays, were found in old PCs in the early to mid-1980s. They were 3¼″ high by 5¾″ wide, and up to 8″ deep (83 × 146 × 200 mm), used mainly for hard disks and floppy disk drives.

The total number of available slots for installing 2.5-inch storage drives (e.g. SSDs).

The total number of available slots inside the unit designed to hold 3.5-inch storage drives.

The total number of available slots for installing external drive bays with a width of 5.25 inches.

The total number of available slots for installing additional hardware components to extend the functionality of the device.

A side window is a transparent side (or part of side) in a housing which enables you to see the internal space of the device.

Who can use the product, or what the product can be used for.

The device has illumination.

The device contains speaker(s) to produce sound.

Indicates whether the unit is equipped with a mesh or filter designed to prevent dust and debris from entering the internal components.

The specific status lights available on the unit to provide visual feedback on its current state or connectivity (e.g., AC input, ACT, or Access).

The maximum height of the CPU heatsink that can be installed within the unit, measured in mm.

The maximum length of a graphics card that can be physically installed inside the unit, measured in millimetres.

The maximum permissible length of the power supply unit that can be installed in the device, measured in millimetres.

There is a power supply with this product.

Where the power supply is positioned.

The physical dimensions and mounting standards of the power supply units that can be installed in the device (e.g. ATX, SFX, MicroATX).

The type of audio input that the device requires, and the connection needed.

The type of audio output that the device produces, and the connector(s).

Number of USB 2.0 ports (connecting interfaces) in the device. USB 2.0 was released in April 2000 (now called "Hi-Speed"), adding higher maximum signaling rate of 480 Mbit/s (effective throughput up to 35 MB/s or 280 Mbit/s), USB 2.0 ports are usually black.

The total number of available USB 3.2 Gen 1 (formerly 3.1 Gen 1) Type-A connection ports on the device.